Klay Hygienic Series 4000 Transmitter
The Klay series 4000 is a complete line of high-end intelligent pressure and level transmitters with a stainless steel electronics housing. The calibration / programming can be done very easy without test pressure by using the unique one touch programming button together with the graphic display with backlight. The series 4000 is fully temperature compensated and over 40 different process connections with flush diaphragm available. Options include HART® protocol.
Klay Hygienic Series 9000 Transmitter
The Klay series 9000-San is a complete line of Pressure and Level transmitters with a Stainless steel electronics housing. The calibration programming can be done very easy without test pressure by using the 3 pushbuttons and display. The display can indicate a number of chosen engineering units. The series 9000 is fully temperature compensated and more than 40 different process connections with flush diaphragm are available.
Kobold Hygienic LNK Level Probe
The Kobold conductive level probes LNK-K are use for level measurement. The electrical resistance between metallic vessel and level electrode is measured and evaluated. In combination with the Kobold LZE or LZE-R weld-in sleeves, the probe provides a measuring point that has no dead space and meets hygiene standards. This level switch is therefore very well suited for CIP/SIP cleaning.
.png)
Klay Hygienic Series 8000 Transmitter
The Klay series 8000 pressure & level transmitters incorporate a fully temperature compensated piezo resistive sensor & strong durable flush mounted diaphragm. Designed to be non-clogging and well suited for Clean-In-Place 3-A sanitary service, they are the ideal choice for the food, beverage, biotech, pharmaceutical, and chemical industries.
Kobold Hygienic Microwave Level Sensor
The Kobold LNM microwave level switch is used for detecting levels of fill. The microwave field penetrates several millimetres into the medium. Foam, condensate or remains of the transported medium that have stuck on to the tank are not detected. By using this principle of measurement it is also possible to detect non-conductive media. The level switch is particularly suitable for use with foaming media because the foam itself is not detected. The output of the level switch only switches when the coupling section is completely covered by the medium. This means it is possible to install it into tanks regardless of position. In combination with the KOBOLD LZE or LZE-R weld-in sleeves, the probe provides a measuring point that has no dead space and meets hygiene standards.
Kobold Hygienic Capacitive Level Sensor
The Kobold LNZ capacitive level switch is used for detecting levels of fill. The electric field penetrates several millimetres into the medium. The change in capacity caused by contact with the medium is measured and evaluated. By using this principle of measurement it is also possible to detect non-conductive media. Installation in tanks is very straightforward regardless of position. In combination with the KOBOLD LZE or LZE-R weld-in sleeves, the probe provides a measuring point that has no dead space and meets hygiene standards. Installation is virtually front-flush. This level switch is therefore very well suited for CIP/SIP cleaning.
Klay Hygienic Level Switch
Klay’s robust tuning fork level switch. All stainless steel and suitable for all liquids. They work on the vibrating tuning-fork principle. They are compatible with non-coating and some coating media who viscosities can range up to 5000 cSt. In addition to the electrical switching control function, an LED signals the status of the switch and the presence of power at the NWS’s terminals. The switching logic of the NWS is easily toggled between N/O and N/C by an internal switch. Applications range from aximum and minimum level detection of liquids in tanks. Minimum level detection in conduits as dry run protection of pumps.
.jpg)
Kobold Hygienic Non- Contact Radar Level Sensor
Kobolds hygienic non-contact radar level sensor continuously measures liquids contained in vessels. The NRM is for use in abrassive materials such as chocolates, honey or syrups. It is also appropriate for sanitary environments such as human or animal food processing or pharmaceuticals.
Kobold Ultrasonic Level Switch
The Kobold ultrasonic level meter, model NUS-4, is used for non-contact, continuous level and volume measurement in vessels or for flow measurement in open channels. Level measurement technology based on the non-contacting ultrasonic principle is especially suited for applications where, for any reason, no physical contact can be established to the surface of the material to be measured. Such reasons may include corrosive attack by the process medium against the measuring device material (acids), possible contamination (sewage) or particles of the process medium adhering to the measuring device (adhesive materials).
.jpg)
Kobold Industrial Float Level Switch
Kobold type NGS industrial level switches are rugged switches built for the harshest of environments. All wetted parts are constructed of 316 stainless steel. The SPDT switch is activated by a permanent magnet external to the switch housing so that no penetration exists between the process medium and the switch internals. This mode of operation results in a very reliable switch which requires no external power to operate. The high-capacity, 10 Amp mechanical switch will directly operate most electrical loads such as relays, solenoid valves, and motor starters.
Kobold industrial Level Switch
The KOBOLD liquid level switch NWS is designed as a 2 and 3-wire switch and can be universally used in vessels and pipelines. The NWS operates on the tuning fork principle in air at resonance frequency. When the fork is immersed in liquid, the frequency changes: this change is detected electronically and the output signal is changed. The NWS operates as a 2-wire switch in series with the load. The simple electronic switch is operated by the liquid.
Kobold Rotating Vane Level Switch
The NIR-9 level monitor is suitable for wide applications for bulks and solids in silos and hoppers. Regardless of humidity and conductivity of the product, the maximum or minimum level is controlled reliably. Available are different vanes and process connections according to each product and tank size.
Kobold PDD Pressure Sensor/Switch
Kobold pressure sensors/switches series PDD are cost effective electronic pressure switches with digital indication of actual pressure. Two switch points, on-/off-switch delay and hysteresis are programmable within the measuring range. A piezzo resistive ceramic sensor is used. The units can be used where high switching accuracy is needed. Long term stability, repeatability and the compact and robust design make them ideal for use in OEM applications.
Fintek Hygienic Pressure Switch
Finetek's SIS hygienic pressure switch is used for high, low position alarm in production process tank or pipelines.The compact design to facilitate carrying and transporting, and can be quickly installed even in the area of narrow space or difficult operation. Suitable for use in the CIP and SIP cleaning applications, the surface roughness (Ra) level can be adjusted according to customer's needs, suitable for use in pharmaceutical and food processing industry applications.
Ashcroft Hygienic Digital Pressure Gauge
The Ashcroft® 2030 series digital sanitary pressure gauges are multifunctional instruments providing exceptional features and performance. Conventional or inline style Tri-Clamp® connections allow gauges to be cleaned or steamed in place in sanitary applications. An ideal indicator for satisfying many pharmaceutical, biotech or food processing applications.
Ashcroft Industrial Pressure Gauge
Ashcroft pressure gauge’s are measurement devices which determines the pressure in a compressed gas or liquid that is specified by the force that the fluid would exert when at rest. They are generally are available in 3 readings; Psi, Kpa, or Bar & the dial is available with either analogue or digital readouts. Industrial gauges are available in brass or stainless steel construction & can be supplied dry or liquid filled when protection is required against pulsation and or vibration.
Ashcroft Hygienic Pressure Gauge
Ashcroft sanitary pressure gauges are specially designed to exceed the demanding safety requirements of the food, dairy, beverage, pharmaceutical, and biotech industries. With its full stainless steel construction, the range is ideal for resisting chemical, weather or corrosion effects, & can be supplied dry or liquid filled when protection is required against pulsation and or vibration.
Ashcroft Hygienic Pressure Gauge
The Ashcroft® 1036 inline 3A approved sanitary gauge satisfies stringent sanitary requirements with its unique design. Mated with the type 1037 Inline fitting, this assembly virtually eliminates process deadleg, assuring contamination is minimized. An ideal instrument for reliability and process integrity. Available with material traceable certification to EN 10205: 2004 3.1. An electropolished diaphragm and housing make it an ideal solution for applications in the food, pharmaceutical and bio-technical industries.
Klay Hygienic Temperature Sensor
Klays range of PT 100 temperature sensors is for use in tanks or conduits as well as rooms and ovens.peration on tanks and pipings especially in hygienic applications. All standard types of process connections are available. Because of its robust design it is suitable for use in a great number of technological processes. The change in resistance, dependant on the measurement temperature, can be detected by a transmitter and converted into a standardized signal. A variety of transmitters for head mounting is available for different applications.
Reotemp Hygienic RTD Sensor
Reotemp’s Sanitary RTD Head Assemblies are designed for direct insertion into sanitary tri-clamp systems and applications. Their 3-A approved 316 stainless steel wetted surfaces are highly polished to reduce the risk of unsanitary conditions. Reotemp sanitary RTD head assemblies are highly customizable and available configured with optional transmitters. Designed for temperature sensing in food, dairy, beverage and pharmaceutical applications where sensor corrosion and product contamination are critical factors. All sanitary temperature sensors are ideal for CIP (Clean-in-place) or SIP (Steam-in-Place) and feature wetted parts highly polished to exceed 3-A Requirements.
Kobold Digital Temperature Switch
Temperature switches of model TDD are used for economical measurement and monitoring of temperature. They are suited for applications where temperature must be monitored with a high degree of switching accuracy. A semiconductor, which outputs a digital signal to the evaluating electronics in 0.5 °C steps, serves as sensor element. The current measured value is displayed on a 3-digit LED display. Two switch points, on-/off-switching delay and hysteresis are adjustable within the measuring range.
Ashcroft Bi-Metal Thermometer
Ashcroft bi-metallic thermometer provides high quality and performance. An ideal choice for accurate temperature measurement. Dial size available in 2", 3", and 5", with varying temperature reading options. Avaialble in stainless 316, they are suited to a wide range of applications in food, beverage, cosmetic, & pharmaceutical industries.
Kobold MIM Magnetic Flow Meter
The Kobold MIM electromagnetic flowmeter was developed for measuring and monitoring small and medium-sized flow of conductive liquids in pipes. The device operates according to the electromagnetic measurement principle. When Dosing or Batch mode the Kobold MIM Magnetic Flow Meter displays the quantity to be batched in a preselectable unit (lts) with the current flow rate also being displayed in lt/min. The progress of the batch process is additionally represented by a graphic animation in which the container shown fills in percent and volume batched. Soft key buttons on the display are used to Stop, Start the batch process and also for resetting the Dosing or Batch Value.
Kobold Hygienic Thermal Flow Switch
The Kobold® type KAL-K Series thermal flow switches utilize Kobold’s revolutionary temperature compensating electronics. These compact, one-piece units provide reliable readings largely unaffected by temperature or physical characteristics of a wide variety of water-based process liquids. The KAL-K is offered with a NPT or a 3-A compliant Tri-Clamp fitting. The thermal flow switch incorporates an 8 segment bar graph LED flow trend indicator and one flow alarm setpoint. The setpoint is fully configurable as NPN, PNP, normally-open or normally-closed.
ABB Hygienic Magnetic Flow Meter
ABB series of electromagnetic flow meters are available in a sanitary version which meets the strict requirements of the food-processing and bio-technology/ pharmaceutical industries. They come with Tri Clamp ends in 1.5" ,2" and 3" and can be used in the transfer of liquids such as milk, drinks, sauces,beer, wine & other conductive liquids.
ABB Hygienic Coriolois Flow Meter
ABB's Hygienic coriolis flow meter is designed for hygienic applications that feature low pressure drop, high capacity or products that are non concductive. The ABB common display, five modular I/Os and hart communication. These meters offer EHEDG certified cleanability with polished wetted materials. Coriolis flow meters are designed for products such as olive or canola oil, chemicals or acids with little or no conductivity.
Kobold DON Oval Gear Flow Meter
The Kobold Don oval gear positive displacement flow meters are the preferred choice for measuring clean, high & low viscosity liquids such as oils, waste water, chemicals, resins and pastes. This metal flow meter uses 2 precision-machined oval gears which allow for a very specific volume of liquid to pass through the meter with each rotation. These gears enable the Don to precisely measure liquid flow over a very wide viscosity range.
Kobold DOT Turbine Flow Meter
The turbine flowmeter model DOT consists of a helically shaped turbine rotor supported in two tungsten carbide bearings, the rotor being solid ferritic stainless steel of a grade compatible with the metered liquid, all contained within a housing of non-magnetic stainless steel. A pick off coil having a permanent magnet core is mounted in the housing adjacent to the rotor blade tips such that a magnetic circuit is set up via the rotor blades.
Kobold LCI Hygienic Conductivity Sensor
The Kobold LCI is used for the hygienic measurement and control of the conductivity and respectively for concentrations of liquid media. The integrated temperature measurement makes exact and fast temperature compensation (linear and nonlinear) possible, which is particularly important for the measurement of the conductivity. Additional functions such as the combined switching of the measurement range and temperature make possible the optimum use in case of CIP-processes.
Kobold ATL industrial Conductivity Sensor
The Kobold Turbidity Probe ATL is a high-precision NIR single channel absorption probe. The ATL uses light in the Near Infrared (NIR) from 730 ... 970 nm. The optical filter on the lamp side adapts the wavelength for specific applications & allows colour-insensitive concentration measurements in the near infrared range.
